From the network where you want to initiate the test from.
Subscribe to:
Post Comments (Atom)
Featured Posts
-
Once the switch starts turning interfaces Up/down start and keep pressing crtl+c until it reqches shell # From there #cd /mnt/flash #ls #rm...
-
root> configure Entering configuration mode Users currently editing the configuration: root terminal d0 (pid 1488) on since 2019-04-...
-
Requirement: Connect two routers on l3 using OSPF using different area ID. Following is a snap of the current Topology: R2 is the medi... -
In some VMs you will notice connecting via VNC gives a very bad mouse cursor movement experience. You need to add the following after -nog...
-
Mikrotik Configuration: admin@IKF_CORE] > /interface wireless security-profiles set [ find default=yes ] supplicant-identity=MikroTik ...
-
---------------------------------------------------------- =>Inventum Login: User: root Password: inventumadmin -------------------------...
-
Setting name and setting description is different. If dis vlan 101 is run, the output will show the description and not the name. Alter... -
Following is the snippet to set Console Password: <Huawei>system <Huawei>system-view Enter system view, return user view wi... -
Set up multiple IP Addresses to a single interface: [R1-Ethernet0/0/0]ip address 10.0.0.5 30 [R1-Ethernet0/0/0]ip address 10.0.0.1 30 sub... -
Look at the above snap ^ If you enable fast or autonomous switching on an interface, packets coming from any other interface on th...
No comments:
Post a Comment